Phillips 66® Multipurpose R&O Oil is a rust and oxidation (R&O)-inhibited, anti-wear circulating oil developed for use in circulation systems, centrifugal air compressors, geared turbines, lightly loaded enclosed gear drives and many other industrial applications. It contains a low level of ashless (zinc-free) anti-wear additive for mild wear protection.
MULTIPURPOSE R&O OIL
RUST & OXIDATION-INHIBITED, ANTI-WEAR CIRCULATING OIL
Links of Interest
Features & Benefits
- Good oxidation resistance to minimize sludge and varnish formation
- Mild wear protection
- Protects against rust and corrosion
- Excellent water-separating properties
- Low carbon-forming tendency for use in centrifugal air compressors
- Good foam resistance
Applications
- Air tools and other pneumatic equipment lubricated through air line lubricators
- Centrifugal air compressors
- Steam turbines and hydroelectric turbines, both direct-drive and with gear drives
- Lightly loaded enclosed industrial gear drives where the OEM specifies a R&O type oil (ISO VG 68 and higher, typically)
- Lightly loaded plain and rolling-element bearings, such as those in electric motors and blowers
- Vacuum pumps, deep-well water pumps and machine tools
- General-purpose machinery and shop lubrication
Technical Details
- ISO Grade: 22
- ISO Grade: 32
- ISO Grade: 46
- ISO Grade: 68
- ISO Grade: 100
- ISO Grade: 150
- ISO Grade: 220
- ISO Grade: 320
- ISO Grade: 460
- ISO Grade: 22
- ISO Grade: 32
- ISO Grade: 46
- ISO Grade: 68
- ISO Grade: 100
- ISO Grade: 150
- ISO Grade: 220
- ISO Grade: 320
- ISO Grade: 460
Licenses & Approvals
Multipurpose R&O Oil meets the requirements of the following industry and OEM specifications: #ABB G12106 #AGMA Grades 0 through 7 (non-EP) #Alstom Power HTGD 90 117 for geared turbines #ASTM D4304 Type I Turbine Oil (ISO VG 32, 46, 68, 100) #British Standard 489 #Denison Hydraulics HF-1 #DIN 51517 Part 2, Lubricating Oils, Type CL #DIN 51524 Part 1, Hydraulic Oils, Type HL #General Electric GEK 101941A, GEK 46506e, GEK 27070 (obsolete), GEK 28143A (obsolete) #Ingersoll-Rand Centak centrifugal compressors #Solar Turbines ES 9-224 Class II Turbine Oil #U.S. Military MIL-L-17672D #U.S. Steel 126
Additional Details
| ISO Grade | 22 |
| AGMA Grade | --- |
| Specific Gravity @ 60°F | 0.856 |
| Density, lbs/gal @ 60°F | 7.13 |
| Color, ASTM 1500 | 0.5 |
| Flash Point (COC), °C (°F) | 210 (410) |
| Pour Point, °C (°F) | -40 (-40) |
| Viscosity | |
| cSt @ 40°C | 22 |
| cSt @ 100°C | 4.3 |
| SUS @ 100°F | 115 |
| SUS @ 210°F | 40.7 |
| Viscosity Index | 101 |
| Acid Number, ASTM D974, mg KOH/g | 0.14 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 20 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Four-Ball Wear, ASTM D4172 | |
| Scar Diameter, mm | --- |
| FZG Scuffing Test, ASTM D5182 | |
| Failure Load Stage | --- |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | --- |
| RPVOT, ASTM D2272, minutes | --- |
| Rust Test, ASTM D665 A&B | Pass |
Licenses & Approvals
Multipurpose R&O Oil meets the requirements of the following industry and OEM specifications: #ABB G12106 #AGMA Grades 0 through 7 (non-EP) #Alstom Power HTGD 90 117 for geared turbines #ASTM D4304 Type I Turbine Oil (ISO VG 32, 46, 68, 100) #British Standard 489 #Denison Hydraulics HF-1 #DIN 51517 Part 2, Lubricating Oils, Type CL #DIN 51524 Part 1, Hydraulic Oils, Type HL #General Electric GEK 101941A, GEK 46506e, GEK 27070 (obsolete), GEK 28143A (obsolete) #Ingersoll-Rand Centak centrifugal compressors #Solar Turbines ES 9-224 Class II Turbine Oil #U.S. Military MIL-L-17672D #U.S. Steel 126
Additional Details
| ISO Grade | 32 |
| AGMA Grade | 0 |
| Specific Gravity @ 60°F | 0.862 |
| Density, lbs/gal @ 60°F | 7.18 |
| Color, ASTM 1500 | 0.5 |
| Flash Point (COC), °C (°F) | 232 (450) |
| Pour Point, °C (°F) | -40 (-40) |
| Viscosity | |
| cSt @ 40°C | 32.5 |
| cSt @ 100°C | 5.4 |
| SUS @ 100°F | 168 |
| SUS @ 210°F | 44.4 |
| Viscosity Index | 99 |
| Acid Number, ASTM D974, mg KOH/g | 0.14 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 20 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Four-Ball Wear, ASTM D4172 | |
| Scar Diameter, mm | 0.54 |
| FZG Scuffing Test, ASTM D5182 | |
| Failure Load Stage | 10 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | 4500 |
| RPVOT, ASTM D2272, minutes | 750 |
| Rust Test, ASTM D665 A&B | Pass |
Licenses & Approvals
Multipurpose R&O Oil meets the requirements of the following industry and OEM specifications: #ABB G12106 #AGMA Grades 0 through 7 (non-EP) #Alstom Power HTGD 90 117 for geared turbines #ASTM D4304 Type I Turbine Oil (ISO VG 32, 46, 68, 100) #British Standard 489 #Denison Hydraulics HF-1 #DIN 51517 Part 2, Lubricating Oils, Type CL #DIN 51524 Part 1, Hydraulic Oils, Type HL #General Electric GEK 101941A, GEK 46506e, GEK 27070 (obsolete), GEK 28143A (obsolete) #Ingersoll-Rand Centak centrifugal compressors #Solar Turbines ES 9-224 Class II Turbine Oil #U.S. Military MIL-L-17672D #U.S. Steel 126
Additional Details
| ISO Grade | 46 |
| AGMA Grade | 1 |
| Specific Gravity @ 60°F | 0.868 |
| Density, lbs/gal @ 60°F | 7.23 |
| Color, ASTM 1500 | 0.5 |
| Flash Point (COC), °C (°F) | 238 (460) |
| Pour Point, °C (°F) | -40 (-40) |
| Viscosity | |
| cSt @ 40°C | 45 |
| cSt @ 100°C | 6.7 |
| SUS @ 100°F | 232 |
| SUS @ 210°F | 48.7 |
| Viscosity Index | 101 |
| Acid Number, ASTM D974, mg KOH/g | 0.14 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 20 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Four-Ball Wear, ASTM D4172 | |
| Scar Diameter, mm | 0.48 |
| FZG Scuffing Test, ASTM D5182 | |
| Failure Load Stage | 10 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | 4500 |
| RPVOT, ASTM D2272, minutes | 750 |
| Rust Test, ASTM D665 A&B | Pass |
Licenses & Approvals
Multipurpose R&O Oil meets the requirements of the following industry and OEM specifications: #ABB G12106 #AGMA Grades 0 through 7 (non-EP) #Alstom Power HTGD 90 117 for geared turbines #ASTM D4304 Type I Turbine Oil (ISO VG 32, 46, 68, 100) #British Standard 489 #Denison Hydraulics HF-1 #DIN 51517 Part 2, Lubricating Oils, Type CL #DIN 51524 Part 1, Hydraulic Oils, Type HL #General Electric GEK 101941A, GEK 46506e, GEK 27070 (obsolete), GEK 28143A (obsolete) #Ingersoll-Rand Centak centrifugal compressors #Solar Turbines ES 9-224 Class II Turbine Oil #U.S. Military MIL-L-17672D #U.S. Steel 126
Additional Details
| ISO Grade | 68 |
| AGMA Grade | 2 |
| Specific Gravity @ 60°F | 0.873 |
| Density, lbs/gal @ 60°F | 7.27 |
| Color, ASTM 1500 | 0.5 |
| Flash Point (COC), °C (°F) | 243 (469) |
| Pour Point, °C (°F) | -34 (-29) |
| Viscosity | |
| cSt @ 40°C | 68 |
| cSt @ 100°C | 8.8 |
| SUS @ 100°F | 352 |
| SUS @ 210°F | 55.9 |
| Viscosity Index | 102 |
| Acid Number, ASTM D974, mg KOH/g | 0.14 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 20 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Four-Ball Wear, ASTM D4172 | |
| Scar Diameter, mm | 0.45 |
| FZG Scuffing Test, ASTM D5182 | |
| Failure Load Stage | 10 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | 4500 |
| RPVOT, ASTM D2272, minutes | 700 |
| Rust Test, ASTM D665 A&B | Pass |
Licenses & Approvals
Multipurpose R&O Oil meets the requirements of the following industry and OEM specifications: #ABB G12106 #AGMA Grades 0 through 7 (non-EP) #Alstom Power HTGD 90 117 for geared turbines #ASTM D4304 Type I Turbine Oil (ISO VG 32, 46, 68, 100) #British Standard 489 #Denison Hydraulics HF-1 #DIN 51517 Part 2, Lubricating Oils, Type CL #DIN 51524 Part 1, Hydraulic Oils, Type HL #General Electric GEK 101941A, GEK 46506e, GEK 27070 (obsolete), GEK 28143A (obsolete) #Ingersoll-Rand Centak centrifugal compressors #Solar Turbines ES 9-224 Class II Turbine Oil #U.S. Military MIL-L-17672D #U.S. Steel 126
Additional Details
| ISO Grade | 100 |
| AGMA Grade | 3 |
| Specific Gravity @ 60°F | 0.877 |
| Density, lbs/gal @ 60°F | 7.3 |
| Color, ASTM 1500 | 0.5 |
| Flash Point (COC), °C (°F) | 268 (514) |
| Pour Point, °C (°F) | -34 (-29) |
| Viscosity | |
| cSt @ 40°C | 101 |
| cSt @ 100°C | 11.3 |
| SUS @ 100°F | 527 |
| SUS @ 210°F | 65 |
| Viscosity Index | 98 |
| Acid Number, ASTM D974, mg KOH/g | 0.14 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 20 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Four-Ball Wear, ASTM D4172 | |
| Scar Diameter, mm | 0.45 |
| FZG Scuffing Test, ASTM D5182 | |
| Failure Load Stage | 10 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | 4500 |
| RPVOT, ASTM D2272, minutes | 700 |
| Rust Test, ASTM D665 A&B | Pass |
Licenses & Approvals
Multipurpose R&O Oil meets the requirements of the following industry and OEM specifications: #ABB G12106 #AGMA Grades 0 through 7 (non-EP) #Alstom Power HTGD 90 117 for geared turbines #ASTM D4304 Type I Turbine Oil (ISO VG 32, 46, 68, 100) #British Standard 489 #Denison Hydraulics HF-1 #DIN 51517 Part 2, Lubricating Oils, Type CL #DIN 51524 Part 1, Hydraulic Oils, Type HL #General Electric GEK 101941A, GEK 46506e, GEK 27070 (obsolete), GEK 28143A (obsolete) #Ingersoll-Rand Centak centrifugal compressors #Solar Turbines ES 9-224 Class II Turbine Oil #U.S. Military MIL-L-17672D #U.S. Steel 126
Additional Details
| ISO Grade | 150 |
| AGMA Grade | 4 |
| Specific Gravity @ 60°F | 0.882 |
| Density, lbs/gal @ 60°F | 7.35 |
| Color, ASTM D1500 | 2.5 |
| Flash Point (COC), °C (°F) | 277 (531) |
| Pour Point, °C (°F) | -17 (1) |
| Viscosity | |
| cSt @ 40°C | 158 |
| cSt @ 100°C | 15.3 |
| SUS @ 100°F | 830 |
| SUS @ 210°F | 81.0 |
| Viscosity Index | 97 |
| Acid Number, ASTM D974, mg KOH/g | 0.14 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 20 |
| Foam Test, ASTM D892, Seq. I, ml | 0/0 |
| Four-Ball Wear, ASTM D4172 | |
| Scar Diameter, mm | 0.41 |
| FZG Scuffing Test, ASTM D5182 | |
| Failure Load Stage | 10 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | 4000 |
| RPVOT, ASTM D2272, minutes | 700 |
| Rust Test, ASTM D665 A&B | Pass |
Licenses & Approvals
Multipurpose R&O Oil meets the requirements of the following industry and OEM specifications: #ABB G12106 #AGMA Grades 0 through 7 (non-EP) #Alstom Power HTGD 90 117 for geared turbines #ASTM D4304 Type I Turbine Oil (ISO VG 32, 46, 68, 100) #British Standard 489 #Denison Hydraulics HF-1 #DIN 51517 Part 2, Lubricating Oils, Type CL #DIN 51524 Part 1, Hydraulic Oils, Type HL #General Electric GEK 101941A, GEK 46506e, GEK 27070 (obsolete), GEK 28143A (obsolete) #Ingersoll-Rand Centak centrifugal compressors #Solar Turbines ES 9-224 Class II Turbine Oil #U.S. Military MIL-L-17672D #U.S. Steel 126
Additional Details
| ISO Grade | 220 |
| AGMA Grade | 5 |
| Specific Gravity @ 60°F | 0.885 |
| Density, lbs/gal @ 60°F | 7.37 |
| Color, ASTM D1500 | 3.5 |
| Flash Point (COC), °C (°F) | 285 (545) |
| Pour Point, °C (°F) | -15 (5) |
| Viscosity | |
| cSt @ 40°C | 220 |
| cSt @ 100°C | 18.8 |
| SUS @ 100°F | 1164 |
| SUS @ 210°F | 95.9 |
| Viscosity Index | 95 |
| Acid Number, ASTM D974, mg KOH/g | 0.14 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 20 |
| Foam Test, ASTM D892, Seq. I, ml | 0/0 |
| Four-Ball Wear, ASTM D4172 | |
| Scar Diameter, mm | 0.41 |
| FZG Scuffing Test, ASTM D5182 | |
| Failure Load Stage | 10 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | 4000 |
| RPVOT, ASTM D2272, minutes | 700 |
| Rust Test, ASTM D665 A&B | Pass |
Licenses & Approvals
Multipurpose R&O Oil meets the requirements of the following industry and OEM specifications: #ABB G12106 #AGMA Grades 0 through 7 (non-EP) #Alstom Power HTGD 90 117 for geared turbines #ASTM D4304 Type I Turbine Oil (ISO VG 32, 46, 68, 100) #British Standard 489 #Denison Hydraulics HF-1 #DIN 51517 Part 2, Lubricating Oils, Type CL #DIN 51524 Part 1, Hydraulic Oils, Type HL #General Electric GEK 101941A, GEK 46506e, GEK 27070 (obsolete), GEK 28143A (obsolete) #Ingersoll-Rand Centak centrifugal compressors #Solar Turbines ES 9-224 Class II Turbine Oil #U.S. Military MIL-L-17672D #U.S. Steel 126
Additional Details
| ISO Grade | 320 |
| AGMA Grade | 6 |
| Specific Gravity @ 60°F | 0.889 |
| Density, lbs/gal @ 60°F | 7.40 |
| Color, ASTM D1500 | 4.5 |
| Flash Point (COC), °C (°F) | 304 (579) |
| Pour Point, °C (°F) | -15 (5) |
| Viscosity | |
| cSt @ 40°C | 320 |
| cSt @ 100°C | 24.1 |
| SUS @ 100°F | 1704 |
| SUS @ 210°F | 120 |
| Viscosity Index | 96 |
| Acid Number, ASTM D974, mg KOH/g | 0.14 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 20 |
| Foam Test, ASTM D892, Seq. I, ml | 0/0 |
| Four-Ball Wear, ASTM D4172 | |
| Scar Diameter, mm | 0.40 |
| FZG Scuffing Test, ASTM D5182 | |
| Failure Load Stage | 10 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | 4000 |
| RPVOT, ASTM D2272, minutes | 700 |
| Rust Test, ASTM D665 A&B | Pass |
Licenses & Approvals
Multipurpose R&O Oil meets the requirements of the following industry and OEM specifications: #ABB G12106 #AGMA Grades 0 through 7 (non-EP) #Alstom Power HTGD 90 117 for geared turbines #ASTM D4304 Type I Turbine Oil (ISO VG 32, 46, 68, 100) #British Standard 489 #Denison Hydraulics HF-1 #DIN 51517 Part 2, Lubricating Oils, Type CL #DIN 51524 Part 1, Hydraulic Oils, Type HL #General Electric GEK 101941A, GEK 46506e, GEK 27070 (obsolete), GEK 28143A (obsolete) #Ingersoll-Rand Centak centrifugal compressors #Solar Turbines ES 9-224 Class II Turbine Oil #U.S. Military MIL-L-17672D #U.S. Steel 126
Additional Details
| ISO Grade | 460 |
| AGMA Grade | 7 |
| Specific Gravity @ 60°F | 0.892 |
| Density, lbs/gal @ 60°F | 7.43 |
| Color, ASTM D1500 | 5 |
| Flash Point (COC), °C (°F) | 307 (585) |
| Pour Point, °C (°F) | -15 (5) |
| Viscosity | |
| cSt @ 40°C | 464 |
| cSt @ 100°C | 30.6 |
| SUS @ 100°F | 2488 |
| SUS @ 210°F | 150 |
| Viscosity Index | 95 |
| Acid Number, ASTM D974, mg KOH/g | 0.14 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 25 |
| Foam Test, ASTM D892, Seq. I, ml | 0/0 |
| Four-Ball Wear, ASTM D4172 | |
| Scar Diameter, mm | 0.40 |
| FZG Scuffing Test, ASTM D5182 | |
| Failure Load Stage | 10 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | 4000 |
| RPVOT, ASTM D2272, minutes | 700 |
| Rust Test, ASTM D665 A&B | Pass |
