Food Machinery Grease (new)

Food Processing Machinery Extreme Pressure Aluminum Complex Grease NSF H1 Registered

Phillips 66®Food Machinery Grease is a premium quality, food grade, extreme pressure (EP), aluminum complex grease specially developed for the lubrication of machinery in food processing, bottling and packaging plants. It is registered by NSF International as an H1 lubricant for use where incidental food contact may occur,and also meets the requirements of the Canadian Food Inspection Agency (CFIA) for incidental food contact.

Food Machinery Grease is manufactured with high quality base oils and thickened with an aluminum complex soap. It is compounded with special food grade additives to provide excellent EP and antiwear properties, excellent oxidation resistance and good adhesion to metal surfaces. It has excellent resistance to water washout and provides excellent rust and corrosion protection in applications where the equipment is exposed to fruit acids, chemicals, or saline solutions.

Features & Benefits

  • Excellent oxidation resistance
  • Excellent resistance to water washout
  • Good extreme pressure and antiwear properties
  • Protects against rust and corrosion
  • Good adhesion to metal surfaces
  • Non-staining
  • Suitable for use over a wide range of operating temperatures

Note: Aluminum complex greases have an inherent tendency to bleed a small amount of oil during storage. Containers of Food Machinery Grease should be stored in a temperature controlled environment to minimize oil separation.

Applications

  • Food processing equipment in canneries, meat packing plants and poultry plants
  • Bottling plants
  • Seamers
Food Machinery Grease meets the requirements of the following government and industry specifications:
  • Canadian Food Inspection Agency (CFIA) requirements for incidental food contact (LONO)
  • FDA 21 CFR 178.3570 for incidental food contact
  • NSF International H1 and former 1998 USDA H1 guidelines for incidental food contact
  • U.S. EPA/U.S. Coast Guard Static Sheen Test, Federal Register Vol. 58, No.41

Technical Details

Licenses & Approvals

N/A

Additional Details
NLGI Grade2
Thickener TypeAluminum Complex
ColorWhite
TextureSmooth/Tacky
Density, lbs/gal7.86
Dropping Point, °C (°F), ASTM D2265260 (500)
Viscosity, Kinematic, ASTM D445
cSt @ 40°C222
cSt @ 100°C27.2
Penetration, Worked (60 strokes), ASTM D217265-295
Oxidation Stability, 100 Hours, psi (kPa), ASTM D9425 (34.5)
Four-Ball Wear Scar, mm, ASTM D22660.55
Four-Ball EP, Weld Load, Kgf, ASTM D2596500
Timken OK Load, lbs, ASTM D250940
Corrosion Prevention, ASTM D1743Pass
Copper Corrosion, ASTM D40481b
Water Spray-off, wt%, ASTM D404927.5