Phillips 66® Megaflow AW Hydraulic Oil is a high-quality anti-wear hydraulic oil developed for use in a wide variety of industrial and mobile hydraulic system applications. It meets the performance requirements of all major hydraulic pump manufacturers, and is recommended for use in all types of high-pressure, high-speed hydraulic pumps.
MEGAFLOW® AW HYDRAULIC OIL
HIGH-QUALITY ANTI-WEAR HYDRAULIC OIL
Links of Interest
Features & Benefits
- Excellent wear protection for hydraulic pumps and motors
- Excellent oxidation resistance and thermal stability
- Protects against rust and corrosion
- Excellent water-separating properties
- Good foam resistance
Applications
- Hydraulic systems on industrial, mobile and marine equipment
- Plastic injection molding presses (ISO 46)
- Elevators, hoists, presses and floor jacks
- Marine cargo winches and steering systems
- Mobile construction equipment
- Service station lifts
- Air tools and other pneumatic equipment lubricated through air line lubricators
- Chain drives
- Electric motor bearings
- Lightly to moderately loaded enclosed industrial gear drives that do not require a compounded or extreme-pressure (EP) gear oil
Technical Details
- 22
- 32
- 46
- 68
- 100
- 150
- 220
- 320
- 22
- 32
- 46
- 68
- 100
- 150
- 220
- 320
Licenses & Approvals
Megaflow AW Hydraulic Oil meets the requirements of the following industry and OEM specifications: #Husky Injection Molding Systems (approved, ISO 46) #Kraus Maffei Hydraulic Oil (ISO 46) #Bosch Rexroth RE 90220, Type HLP #DIN 51524 Part 2, Anti-wear Hydraulic Oils, Type HLP #Parker Hannifin (Denison) HF-0, HF-1, HF-2 (approved ISO 32, 46, and 68) #Eaton-Vickers I-286-S, M-2950-S, 35VQ25A anti-wear performance (brochure 03-401-2010 Rev 1 ISO 32, 46, and 68) #Fives Cincinnati P-68 (ISO VG 32), P-70 (ISO VG 46), P-69 (ISO VG 68) (approved) #German Steel Industry SEB 181222 #ISO 11158:1997, Family H (Hydraulic Systems), Type HM #U.S. Steel 127
Additional Details
| ISO Grade | 22 |
| Specific Gravity @ 60°F | 0.855 |
| Density, lbs/gal @ 60°F | 7.12 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F) | 196 (385) |
| Pour Point, °C (°F) | -40 (-40) |
| Viscosity | |
| cSt @ 40°C | 22 |
| cSt @ 100°C | 4.3 |
| SUS @ 100°F | 106 |
| SUS @ 210°F | 39.9 |
| Viscosity Index | 101 |
| Acid Number, ASTM D974, mg KOH/g | 0.38 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 10 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| FZG Scuffing Test, ASTM D5182 | |
| Failure Load Stage | --- |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | >5000 |
| Rust Test, ASTM D665 A&B | Pass |
| Zinc, wt % | 0.043 |
Licenses & Approvals
Megaflow AW Hydraulic Oil meets the requirements of the following industry and OEM specifications: #Husky Injection Molding Systems (approved, ISO 46) #Kraus Maffei Hydraulic Oil (ISO 46) #Bosch Rexroth RE 90220, Type HLP #DIN 51524 Part 2, Anti-wear Hydraulic Oils, Type HLP #Parker Hannifin (Denison) HF-0, HF-1, HF-2 (approved ISO 32, 46, and 68) #Eaton-Vickers I-286-S, M-2950-S, 35VQ25A anti-wear performance (brochure 03-401-2010 Rev 1 ISO 32, 46, and 68) #Fives Cincinnati P-68 (ISO VG 32), P-70 (ISO VG 46), P-69 (ISO VG 68) (approved) #German Steel Industry SEB 181222 #ISO 11158:1997, Family H (Hydraulic Systems), Type HM #U.S. Steel 127
Additional Details
| ISO Grade | 32 |
| Specific Gravity @ 60°F | 0.862 |
| Density, lbs/gal @ 60°F | 7.18 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F) | 216 (421) |
| Pour Point, °C (°F) | -37 (-35) |
| Viscosity | |
| cSt @ 40°C | 32 |
| cSt @ 100°C | 5.4 |
| SUS @ 100°F | 150 |
| SUS @ 210°F | 44 |
| Viscosity Index | 102 |
| Acid Number, ASTM D974, mg KOH/g | 0.38 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 10 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| FZG Scuffing Test, ASTM D5182 | |
| Failure Load Stage | 12 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | >5000 |
| Rust Test, ASTM D665 A&B | Pass |
| Zinc, wt % | 0.043 |
Licenses & Approvals
Megaflow AW Hydraulic Oil meets the requirements of the following industry and OEM specifications: #Husky Injection Molding Systems (approved, ISO 46) #Kraus Maffei Hydraulic Oil (ISO 46) #Bosch Rexroth RE 90220, Type HLP #DIN 51524 Part 2, Anti-wear Hydraulic Oils, Type HLP #Parker Hannifin (Denison) HF-0, HF-1, HF-2 (approved ISO 32, 46, and 68) #Eaton-Vickers I-286-S, M-2950-S, 35VQ25A anti-wear performance (brochure 03-401-2010 Rev 1 ISO 32, 46, and 68) #Fives Cincinnati P-68 (ISO VG 32), P-70 (ISO VG 46), P-69 (ISO VG 68) (approved) #German Steel Industry SEB 181222 #ISO 11158:1997, Family H (Hydraulic Systems), Type HM #U.S. Steel 127
Additional Details
| ISO Grade | 46 |
| Specific Gravity @ 60°F | 0.869 |
| Density, lbs/gal @ 60°F | 7.24 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F) | 227 (441) |
| Pour Point, °C (°F) | -37 (-35) |
| Viscosity | |
| cSt @ 40°C | 46 |
| cSt @ 100°C | 6.8 |
| SUS @ 100°F | 214 |
| SUS @ 210°F | 48.5 |
| Viscosity Index | 102 |
| Acid Number, ASTM D974, mg KOH/g | 0.38 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 10 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| FZG Scuffing Test, ASTM D5182 | |
| Failure Load Stage | 12 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | >5000 |
| Rust Test, ASTM D665 A&B | Pass |
| Zinc, wt % | 0.043 |
Licenses & Approvals
Megaflow AW Hydraulic Oil meets the requirements of the following industry and OEM specifications: #Husky Injection Molding Systems (approved, ISO 46) #Kraus Maffei Hydraulic Oil (ISO 46) #Bosch Rexroth RE 90220, Type HLP #DIN 51524 Part 2, Anti-wear Hydraulic Oils, Type HLP #Parker Hannifin (Denison) HF-0, HF-1, HF-2 (approved ISO 32, 46, and 68) #Eaton-Vickers I-286-S, M-2950-S, 35VQ25A anti-wear performance (brochure 03-401-2010 Rev 1 ISO 32, 46, and 68) #Fives Cincinnati P-68 (ISO VG 32), P-70 (ISO VG 46), P-69 (ISO VG 68) (approved) #German Steel Industry SEB 181222 #ISO 11158:1997, Family H (Hydraulic Systems), Type HM #U.S. Steel 127
Additional Details
| ISO Grade | 68 |
| Specific Gravity @ 60°F | 0.874 |
| Density, lbs/gal @ 60°F | 7.27 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F) | 238 (460) |
| Pour Point, °C (°F) | -33 (-27) |
| Viscosity | |
| cSt @ 40°C | 68 |
| cSt @ 100°C | 8.7 |
| SUS @ 100°F | 315 |
| SUS @ 210°F | 54.9 |
| Viscosity Index | 99 |
| Acid Number, ASTM D974, mg KOH/g | 0.38 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 10 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| FZG Scuffing Test, ASTM D5182 | |
| Failure Load Stage | 12 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | >5000 |
| Rust Test, ASTM D665 A&B | Pass |
| Zinc, wt % | 0.043 |
Licenses & Approvals
Megaflow AW Hydraulic Oil meets the requirements of the following industry and OEM specifications: #Husky Injection Molding Systems (approved, ISO 46) #Kraus Maffei Hydraulic Oil (ISO 46) #Bosch Rexroth RE 90220, Type HLP #DIN 51524 Part 2, Anti-wear Hydraulic Oils, Type HLP #Parker Hannifin (Denison) HF-0, HF-1, HF-2 (approved ISO 32, 46, and 68) #Eaton-Vickers I-286-S, M-2950-S, 35VQ25A anti-wear performance (brochure 03-401-2010 Rev 1 ISO 32, 46, and 68) #Fives Cincinnati P-68 (ISO VG 32), P-70 (ISO VG 46), P-69 (ISO VG 68) (approved) #German Steel Industry SEB 181222 #ISO 11158:1997, Family H (Hydraulic Systems), Type HM #U.S. Steel 127
Additional Details
| ISO Grade | 100 |
| Specific Gravity @ 60°F | 0.878 |
| Density, lbs/gal @ 60°F | 7.31 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F) | 252 (486) |
| Pour Point, °C (°F) | -32 (-26) |
| Viscosity | |
| cSt @ 40°C | 100 |
| cSt @ 100°C | 11 |
| SUS @ 100°F | 463 |
| SUS @ 210°F | 62.8 |
| Viscosity Index | 94 |
| Acid Number, ASTM D974, mg KOH/g | 0.38 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 10 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| FZG Scuffing Test, ASTM D5182 | |
| Failure Load Stage | 12 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | >5000 |
| Rust Test, ASTM D665 A&B | Pass |
| Zinc, wt % | 0.043 |
Licenses & Approvals
Megaflow AW Hydraulic Oil meets the requirements of the following industry and OEM specifications: #Husky Injection Molding Systems (approved, ISO 46) #Kraus Maffei Hydraulic Oil (ISO 46) #Bosch Rexroth RE 90220, Type HLP #DIN 51524 Part 2, Anti-wear Hydraulic Oils, Type HLP #Parker Hannifin (Denison) HF-0, HF-1, HF-2 (approved ISO 32, 46, and 68) #Eaton-Vickers I-286-S, M-2950-S, 35VQ25A anti-wear performance (brochure 03-401-2010 Rev 1 ISO 32, 46, and 68) #Fives Cincinnati P-68 (ISO VG 32), P-70 (ISO VG 46), P-69 (ISO VG 68) (approved) #German Steel Industry SEB 181222 #ISO 11158:1997, Family H (Hydraulic Systems), Type HM #U.S. Steel 127
Additional Details
| ISO Grade | 150 |
| Specific Gravity @ 60°F | 0.882 |
| Density, lbs/gal @ 60°F | 7.35 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F) | 274 (525) |
| Pour Point, °C (°F) | -33 (-27) |
| Viscosity | |
| cSt @ 40°C | 150 |
| cSt @ 100°C | 14.7 |
| SUS @ 100°F | 695 |
| SUS @ 210°F | 76.8 |
| Viscosity Index | 96 |
| Acid Number, ASTM D974, mg KOH/g | 0.38 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 10 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| FZG Scuffing Test, ASTM D5182 | |
| Failure Load Stage | 12 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | >4500 |
| Rust Test, ASTM D665 A&B | Pass |
| Zinc, wt % | 0.043 |
Licenses & Approvals
Megaflow AW Hydraulic Oil meets the requirements of the following industry and OEM specifications: #Husky Injection Molding Systems (approved, ISO 46) #Kraus Maffei Hydraulic Oil (ISO 46) #Bosch Rexroth RE 90220, Type HLP #DIN 51524 Part 2, Anti-wear Hydraulic Oils, Type HLP #Parker Hannifin (Denison) HF-0, HF-1, HF-2 (approved ISO 32, 46, and 68) #Eaton-Vickers I-286-S, M-2950-S, 35VQ25A anti-wear performance (brochure 03-401-2010 Rev 1 ISO 32, 46, and 68) #Fives Cincinnati P-68 (ISO VG 32), P-70 (ISO VG 46), P-69 (ISO VG 68) (approved) #German Steel Industry SEB 181222 #ISO 11158:1997, Family H (Hydraulic Systems), Type HM #U.S. Steel 127
Additional Details
| ISO Grade | 220 |
| Specific Gravity @ 60°F | 0.881 |
| Density, lbs/gal @ 60°F | 7.34 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F) | 282 (540) |
| Pour Point, °C (°F) | -30 (-22) |
| Viscosity | |
| cSt @ 40°C | 220 |
| cSt @ 100°C | 19.2 |
| SUS @ 100°F | 1020 |
| SUS @ 210°F | 95.1 |
| Viscosity Index | 98 |
| Acid Number, ASTM D974, mg KOH/g | 0.38 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 10 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| FZG Scuffing Test, ASTM D5182 | |
| Failure Load Stage | 12 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | >4500 |
| Rust Test, ASTM D665 A&B | Pass |
| Zinc, wt % | 0.043 |
Licenses & Approvals
Megaflow AW Hydraulic Oil meets the requirements of the following industry and OEM specifications: #Husky Injection Molding Systems (approved, ISO 46) #Kraus Maffei Hydraulic Oil (ISO 46) #Bosch Rexroth RE 90220, Type HLP #DIN 51524 Part 2, Anti-wear Hydraulic Oils, Type HLP #Parker Hannifin (Denison) HF-0, HF-1, HF-2 (approved ISO 32, 46, and 68) #Eaton-Vickers I-286-S, M-2950-S, 35VQ25A anti-wear performance (brochure 03-401-2010 Rev 1 ISO 32, 46, and 68) #Fives Cincinnati P-68 (ISO VG 32), P-70 (ISO VG 46), P-69 (ISO VG 68) (approved) #German Steel Industry SEB 181222 #ISO 11158:1997, Family H (Hydraulic Systems), Type HM #U.S. Steel 127
Additional Details
| ISO Grade | 320 |
| Specific Gravity @ 60°F | 0.887 |
| Density, lbs/gal @ 60°F | 7.38 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F) | 274 (525) |
| Pour Point, °C (°F) | -24 (-11) |
| Viscosity | |
| cSt @ 40°C | 320 |
| cSt @ 100°C | 24.3 |
| SUS @ 100°F | 1483 |
| SUS @ 210°F | 117 |
| Viscosity Index | 96 |
| Acid Number, ASTM D974, mg KOH/g | 0.38 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 10 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| FZG Scuffing Test, ASTM D5182 | |
| Failure Load Stage | 12 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | >4500 |
| Rust Test, ASTM D665 A&B | Pass |
| Zinc, wt % | 0.043 |
