Moly Low Temp Grease (new)

Low Temperature Applications Extreme Pressure Aluminum Complex Grease 5% Moly

Phillips 66®Moly Low Temp is a multipurpose, extreme pressure (EP), aluminum complex grease developed for use in automotive and industrial equipment operating at low ambient temperatures down to -30°F. It has good mobility at low temperatures plus a high dropping point for year-round use in arctic climates. Moly Low Temp is manufactured with low viscosity base oils and an aluminum complex soap thickener. It is compounded with select additives that provide

EP and antiwear properties, good oxidation resistance, and rust and corrosion protection. It is fortified with 5% molybdenum disulfide (moly) for extra protection in equipment subject to heavy or shock loads. It has good shear stability and resistance to water washout. It is suitable for both winter and summer use in arctic climates.

Features & Benefits

  • Suitable for year-round use in mobile equipment and industrial machinery operating in arctic climates
  • Good low temperature properties down to -30°F
  • Good EP and antiwear properties
  • Contains moly for extra protection under heavy or shock loads
  • Good oxidation resistance
  • Protects against rust and corrosion
  • Good shear stability
  • Good resistance to water washout

Applications

  • Mobile equipment and industrial machinery operating for prolonged periods at temperatures substantially below 32°F
  • Chassis parts, wheel bearings, spring shackles and kingpins on automotive and other mobile equipment operating in arctic climates
  • Chassis parts and wheel bearings on mobile equipment such as lift trucks operating in refrigeration plants, cold storage rooms and sharp-freeze rooms
  • Plain and rolling element bearings, slides and linkages on industrial equipment operating in cold rooms or at low ambient temperatures
  • Track roller bearings and chassis parts on tractors, coal haulers, snow removal equipment and other heavy equipment operating in cold climates

Technical Details

Licenses & Approvals

N/A

Additional Details
NLGI Grade1
Thickener TypeAluminum Complex
TextureSmooth
Density, lbs/gal7.46
ColorBlack
Dropping Point, °C (°F), ASTM D2265260 (500)
Molybdenum Disulfide, wt%5
Viscosity, Kinematic, ASTM D445
cSt @ 40°C25
cSt @ 100°C4.6
Penetration, Worked (60 strokes), ASTM D217310-340
Oxidation Stability, 100 Hours, psi (kPa), ASTM D9425 (34.5)
Four-Ball Wear Scar, mm, ASTM D22660.35
Four-Ball EP, Weld Load, Kgf, ASTM D2596315
Timken OK Load, lbs, ASTM D250945
Corrosion Prevention, ASTM D1743Pass
Copper Corrosion, ASTM D40481b