Omniguard®FS XD5 (new)

Premium Synthetic Mining and Off- Road Equipment Extreme Pressure Calcium Sulfonate Grease 5% Moly

Phillips 66®Omniguard FS XD5 is a premium quality, synthetic, extreme pressure (EP), calcium sulfonate grease developed for use in off-road equipment operating at moderate to very low temperatures. It is particularly recommended for use in mobile equipment such as haul trucks, backhoes, excavators, front-end loaders, motor graders and bulldozers operating in wet conditions and under heavy or shock loads.

Omniguard FS XD5 is manufactured with a low viscosity synthetic polyalphaolefin(PAO) base oil and a non-soap, calcium sulfonate thickener. It is compounded with select additives to provide excellent oxidation resistance, EP and antiwear properties, and protection against rust and corrosion. It is fortified with 5% molybdenum disulfide (moly) for extra wear protection under conditions involving heavy or shock loading. The low viscosity synthetic base oil provides outstanding pumpability at low temperatures.

Omniguard FS XD5 has a distinctive platinum color for identification.

Features & Benefits

  • High load carrying capacity
  • Excellent wear protection
  • Contains 5% moly for extra protection against galling and wear under shockloads
  • Outstanding low temperature properties
  • Excellent resistance to water washout
  • Protects against rust and corrosion

Applications

  • Off-road construction and mining equipment operating at moderate to very low temperatures
  • Steering linkages, king bolt bearings, pin joints, universal joints and other articulated chassis components
  • Heavily loaded plain and rolling element bearings in off-road equipment
  • Conveyor and fan bearings in chemical and manufacturing plants that require a corrosion-resistant grease with moly
  • Centralized lube systems

Technical Details

Licenses & Approvals

N/A

Additional Details
NLGI Grade1
Thickener TypeCalcium Sulfonate
ColorPlatinum
TextureSmooth
Density, lbs/gal8.34
Molybdenum Disulfide, wt%5
Dropping Point, °C (°F), ASTM D2265280 (536)
Viscosity, Kinematic, ASTM D445
cSt @ 40°C37
cSt @ 100°C6.7
Penetration, Worked (60 strokes), ASTM D217310-340
Oxidation Stability, 100 Hours, psi (kPa), ASTM D9423.8 (26)
Four-Ball Wear Scar, mm, ASTM D22660.45
Four-Ball EP, Weld Load, Kgf, ASTM D2596620
Timken OK Load, lbs, ASTM D250960
Corrosion Prevention, ASTM D1743Pass
Copper Corrosion, ASTM D40481b