Powerflow™ AW Hydraulic Oil

Premium Anti-wear Hydraulic Oil for Plastic Injection Molding Machines

Phillips 66®Powerflow AW Hydraulic Oil is a premium quality anti-wear hydraulic oil developed for use in a wide variety of industrial and mobile hydraulic systems operating under high-pressure, high-temperature conditions. It is formulated to provide enhanced wear protection and deposit control for severe service applications. It is particularly recommended for use in plastic injection molding machines where deposit control in the hydraulic circuit of the electro-pneumatic servo valves is essential for trouble-free operation.

Features & Benefits

  • Outstanding performance in plastic injection molding machines
  • Excellent wear protection for hydraulic pumps and motors
  • Excellent oxidation resistance and thermal stability
  • Excellent deposit control
  • Protects against rust and corrosion
  • Excellent water-separating properties
  • Good foam resistance


  • Plastic injection molding machines
  • Automated machine tools
  • Elevators, hoists, presses and floor jacks
  • Marine cargo winches and steering systems
  • Mobile construction equipment
  • Service station lifts
  • Air tools and other pneumatic equipment lubricated through air line lubricators
  • Chain drives
  • Electric motor bearings

Technical Details

Licenses & Approvals

Powerflow AW Hydraulic Oil meets the requirements of the following industry and OEM specifications:

  • Bosch Rexroth RE 90220, Type HLP
  • DIN 51524 Part 2, Antiwear Hydraulic Oils, Type HLP
  • Parker Hannifin (Denison) HF-0, HF-1, HF-2 (approved ISO 32, 46 and 68)
  • Eaton-Vickers I-286-S, M-2950-S, 35VQ25A antiwear performance (brochure 03-401-2010 Rev 1 ISO 32, 46 and 68)
  • Fives Cincinnati P-68 (ISO VG 32), P-70 (ISO VG 46), P-69 (ISO VG 68) (approved)
  • German Steel Industry SEB 181222
  • ISO 11158:1997, Family H (Hydraulic Systems), Type HM
  • U.S. Steel 127
Additional Details
ISO Grade32
Specific Gravity @ 60°F0.863
Density, lbs/gal @ 60°F7.18
Color, ASTM D15000.5
Flash Point (COC), °C (°F)216 (421)
Pour Point, °C (°F)-37 (-35)
cSt @ 40°C32
cSt @ 100°C5.4
SUS @ 100°F150
SUS @ 210°F44
Viscosity Index102
Acid Number, ASTM D974, mg KOH/g0.6
Copper Corrosion, ASTM D1301a
Demulsibility, ASTM D1401, minutes to pass10
Foam Test, ASTM D892, Seq. I, mL0/0
FZG Scuffing Test, ASTM D5182
Failure Load Stage12
Oxidation Stability
TOST, ASTM D943-04a, hours>7,500
Rust Test, ASTM D665 A&BPass
Zinc, wt %0.066