Phillips 66® Syncon Turbine Oil is a premium quality, synthetic lubricant developed for use in land-based gas turbines operating over a wide temperature range, where the manufacturer calls for a synthesized hydrocarbon (SHC) or PAO based turbine oil.
SYNCON® TURBINE OIL
SYNTHETIC PAO-BASED TURBINE OIL
Links of Interest
Features & Benefits
- Outstanding oxidation resistance and thermal stability at high temperatures
- Excellent low-temperature fluidity
- High viscosity index and very low pour point for use over a wide temperature range
- Low volatility for lower oil consumption and less makeup oil
- Protects against wear
- Protects against rust and corrosion
- Good foam resistance
- Extended service intervals compared with conventional mineral oil-based lubricants Note: For more information on compatibility with seals, paints and plastics, please call our Technical Support Hotline.
Applications
- Land-based gas turbines
Technical Details
- ISO Grade: 32
- ISO Grade: 46
- ISO Grade: 32
- ISO Grade: 46
Licenses & Approvals
Syncon Turbine Oil meets the requirements of the following OEM specification:#Solar Turbines ES 9-224, Revision AA, Class I (Synthesized Hydrocarbon) Turbine Oil(1)(1)In order to meet the ES 9-224 cleanliness specification, the fluid may need to be filtered prior to reservoir introduction
Additional Details
| ISO Grade | 32 |
| Specific Gravity @ 60°F | 0.841 |
| Density, lbs/gal @ 60°F | 7 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F) | 254 (489) |
| Pour Point, °C (°F) | -57 (-71) |
| Viscosity | |
| cSt @ 40°C | 32 |
| cSt @ 100°C | 6 |
| SUS @ 100°F | 164 |
| SUS @ 210°F | 46.3 |
| Viscosity Index | 136 |
| Acid Number, ASTM D974, mg KOH/g | 0.36 |
| Copper Corrosion, ASTM D130, 48 hrs @ 80°C | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 10 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Four-Ball Wear Test, ASTM D4172, Scar Diameter, mm | 0.4 |
| FZG Scuffing Test, ASTM D5182, Failure Load Stage | 8 |
| Oxidation Stability, RPVOT, ASTM D2272, minutes | 1600 |
| Rust Test, ASTM D665 A&B | Pass |
Licenses & Approvals
Syncon Turbine Oil meets the requirements of the following OEM specification:#Solar Turbines ES 9-224, Revision AA, Class I (Synthesized Hydrocarbon) Turbine Oil(1)(1)In order to meet the ES 9-224 cleanliness specification, the fluid may need to be filtered prior to reservoir introduction
Additional Details
| ISO Grade | 46 |
| Specific Gravity @ 60°F | 0.846 |
| Density, lbs/gal @ 60°F | 7.04 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F) | 260 (500) |
| Pour Point, °C (°F) | -42 (-44) |
| Viscosity | |
| cSt @ 40°C | 42.4 |
| cSt @ 100°C | 7.5 |
| SUS @ 100°F | 197.7 |
| SUS @ 210°F | 50.8 |
| Viscosity Index | 145 |
| Acid Number, ASTM D974, mg KOH/g | 0.42 |
| Copper Corrosion, ASTM D130, 48 hrs @ 80°C | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 10 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Four-Ball Wear Test, ASTM D4172, Scar Diameter, mm | 0.4 |
| FZG Scuffing Test, ASTM D5182, Failure Load Stage | 8 |
| Oxidation Stability, RPVOT, ASTM D2272, minutes | 1600 |
| Rust Test, ASTM D665 A&B | Pass |
