Phillips 66® Syndustrial R&O Oil is a premium quality, synthetic diester lubricant developed for use in air compressors and select steam turbines operating under severe-service conditions, and in moisture-free environments. It is particularly recommended for use in applications where operating conditions may be unfavorable or too severe for conventional mineral oil-based lubricants.
SYNDUSTRIAL® R&O OIL
SYNTHETIC DIESTER LUBRICANT
Links of Interest
Features & Benefits
- Excellent resistance to thermal breakdown at high temperatures
- Excellent oxidation resistance to minimize sludge and varnish formation
- Protects against wear
- Protects against rust and corrosion
- Natural detergency
- Excellent low-temperature properties
- Extended service intervals compared with conventional mineral oil-based lubricants
Applications
- Reciprocating air compressors
- Select rotary air compressors operating in a dry environment
- Elliott ring-oiled turbines, where a synthetic diester turbine oil is specified
- Circulating systems requiring a synthetic diester lubricant
- Steam turbines where the manufacturer specifies a synthetic diester lubricant
- Plain and rolling-element bearings operating at very high or very low temperatures
- Industrial equipment operating over a wide temperature range where an inhibited mineral oil is recommended
Technical Details
- ISO Grade: 32
- ISO Grade: 68
- ISO Grade: 100
- ISO Grade: 150
- ISO Grade: 32
- ISO Grade: 68
- ISO Grade: 100
- ISO Grade: 150
Licenses & Approvals
N/A
Additional Details
| ISO Grade | 32 |
| Specific Gravity @ 60°F | 0.941 |
| Density, lbs/gal @ 60°F | 7.84 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F) | 243 (469) |
| Pour Point, °C (°F) | -51 (-60) |
| Viscosity | |
| cSt @ 40°C | 31 |
| cSt @ 100°C | 5 |
| SUS @ 100°F | 161 |
| SUS @ 210°F | 43 |
| Viscosity Index | 79 |
| Acid Number, ASTM D974, mg KOH/g | 0.39 |
| Copper Corrosion, ASTM D130, 48 hrs @ 80°C | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 10 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Four-Ball Wear Test, ASTM D4172, Scar Diameter, mm | 0.7 |
| FZG Scuffing Test, ASTM D5182, Failure Load Stage | 9 |
| Oxidation Stability, RPVOT, ASTM D2272, minutes | >1,750 |
| Rust Test, ASTM D665 A&B | Pass |
Licenses & Approvals
N/A
Additional Details
| ISO Grade | 68 |
| Specific Gravity @ 60°F | 0.965 |
| Density, lbs/gal @ 60°F | 8.04 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F) | 254 (489) |
| Pour Point, °C (°F) | -42 (-44) |
| Viscosity | |
| cSt @ 40°C | 65 |
| cSt @ 100°C | 8.4 |
| SUS @ 100°F | 337 |
| SUS @ 210°F | 54.5 |
| Viscosity Index | 98 |
| Acid Number, ASTM D974, mg KOH/g | 0.39 |
| Copper Corrosion, ASTM D130, 48 hrs @ 80°C | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 10 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Four-Ball Wear Test, ASTM D4172, Scar Diameter, mm | 0.8 |
| FZG Scuffing Test, ASTM D5182, Failure Load Stage | 9 |
| Oxidation Stability, RPVOT, ASTM D2272, minutes | >1,750 |
| Rust Test, ASTM D665 A&B | Pass |
Licenses & Approvals
N/A
Additional Details
| ISO Grade | 100 |
| Specific Gravity @ 60°F | 0.961 |
| Density, lbs/gal @ 60°F | 8 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F) | 260 (500) |
| Pour Point, °C (°F) | -39 (-38) |
| Viscosity | |
| cSt @ 40°C | 98.5 |
| cSt @ 100°C | 10.9 |
| SUS @ 100°F | 515 |
| SUS @ 210°F | 63.5 |
| Viscosity Index | 94 |
| Acid Number, ASTM D974, mg KOH/g | 0.39 |
| Copper Corrosion, ASTM D130, 48 hrs @ 80°C | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 15 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Four-Ball Wear Test, ASTM D4172, Scar Diameter, mm | 0.7 |
| FZG Scuffing Test, ASTM D5182, Failure Load Stage | 9 |
| Oxidation Stability, RPVOT, ASTM D2272, minutes | >1,750 |
| Rust Test, ASTM D665 A&B | Pass |
Licenses & Approvals
N/A
Additional Details
| ISO Grade | 150 |
| Specific Gravity @ 60°F | 0.957 |
| Density, lbs/gal @ 60°F | 7.97 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F) | 265 (509) |
| Pour Point, °C (°F) | -39 (-38) |
| Viscosity | |
| cSt @ 40°C | 150 |
| cSt @ 100°C | 15.1 |
| SUS @ 100°F | 786 |
| SUS @ 210°F | 80.1 |
| Viscosity Index | 101 |
| Acid Number, ASTM D974, mg KOH/g | 0.39 |
| Copper Corrosion, ASTM D130, 48 hrs @ 80°C | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 15 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Four-Ball Wear Test, ASTM D4172, Scar Diameter, mm | 0.66 |
| FZG Scuffing Test, ASTM D5182, Failure Load Stage | 9 |
| Oxidation Stability, RPVOT, ASTM D2272, minutes | >1,750 |
| Rust Test, ASTM D665 A&B | Pass |
