BEARING OIL M
RUST AND OXIDATION-INHIBITED CIRCULATING OIL
Phillips 66® Bearing Oil M is a high-quality, rust- and oxidation-inhibited circulating oil designed for lubricating backup roll bearings manufactured by Morgan Construction Company. It meets the "super demulsibility" performance requirements outlined in Morgan's Advanced Lubricant Specification, Revision 2.5, for use in hot and cold rolling mill operations.
Bearing Oil M delivers rapid water separation, excellent oxidation resistance, and strong protection against rust, corrosion, and foaming. Its superior water-separating properties help prevent emulsion formation in circulating systems exposed to water, rolling solutions, dirt, and scale. The oil's thermal stability and oxidation resistance minimize sludge and varnish buildup, ensuring long service life. Additionally, it resists excessive foam, maintaining proper lubrication and system efficiency.
Links of Interest
Features & Benefits
- Excellent water-separating properties
- Excellent oxidation resistance and thermal stability
- Protects against rust and corrosion
- Good foam resistance
Applications
- Backup roll bearings manufactured by Morgan Construction Company
- Backup roll bearings in hot and cold rolling mills
- Bearing lubrication in steel mills
- Circulating systems where water contamination is a problem
- Large, slow-speed gears in mixers and mills
Technical Details
Licenses & Approvals:
Bearing Oil M meets the requirements of the following industry and OEM specifications:- Morgan Construction Advanced Lubricant Specification, Revision 2.5 (05/2009)
- SMS Siemag SN 180 Part 4 (07/2009)
- U.S. Steel 135, Mill Circulating Oil
Additional Details:
| Grade | M150 |
| ISO Grade | 150 |
| Specific Gravity @ 60°F | 0.878 |
| Density, lbs/gal @ 60°F | 7.32 |
| Color, ASTM D1500 | 2.5 |
| Flash Point (COC), °C (°F) | 265 (509) |
| Pour Point, °C (°F) | -20 (-4) |
| Viscosity | |
| cSt @ 40°C | 150 |
| cSt @ 100°C | 14.8 |
| SUS @ 100°F | 788 |
| SUS @ 210°F | 78.9 |
| Viscosity Index | 98 |
| Acid Number, ASTM D974, mg KOH/g | 0.05 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | <20 |
| Demulsibility, ASTM D2711 | |
| Free Water @ 52°C, mL | >30 |
| Demulsibility, UEC Dynamic Endurance Test | |
| Water in Oil after Centrifuging, vol % | <10 |
| Oil in Water after Centrifuging, vol % | <1 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Oxidation Stability, RPVOT | |
| ASTM D2272, minutes | 350 |
| Rust Test, ASTM D665 A | Pass |
Licenses & Approvals:
Bearing Oil M meets the requirements of the following industry and OEM specifications:- Morgan Construction Advanced Lubricant Specification, Revision 2.5 (05/2009)
- SMS Siemag SN 180 Part 4 (07/2009)
- U.S. Steel 135, Mill Circulating Oil
Additional Details:
| Grade | M220 |
| ISO Grade | 220 |
| Specific Gravity @ 60°F | 0.883 |
| Density, lbs/gal @ 60°F | 7.35 |
| Color, ASTM D1500 | 4 |
| Flash Point (COC), °C (°F) | 275 (527) |
| Pour Point, °C (°F) | -14 (7) |
| Viscosity | |
| cSt @ 40°C | 220 |
| cSt @ 100°C | 19 |
| SUS @ 100°F | 1163 |
| SUS @ 210°F | 96.8 |
| Viscosity Index | 97 |
| Acid Number, ASTM D974, mg KOH/g | 0.05 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | <20 |
| Demulsibility, ASTM D2711 | |
| Free Water @ 52°C, mL | >30 |
| Demulsibility, UEC Dynamic Endurance Test | |
| Water in Oil after Centrifuging, vol % | <10 |
| Oil in Water after Centrifuging, vol % | <1 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Oxidation Stability, RPVOT | |
| ASTM D2272, minutes | 350 |
| Rust Test, ASTM D665 A | Pass |
Licenses & Approvals:
Bearing Oil M meets the requirements of the following industry and OEM specifications:- Morgan Construction Advanced Lubricant Specification, Revision 2.5 (05/2009)
- SMS Siemag SN 180 Part 4 (07/2009)
- U.S. Steel 135, Mill Circulating Oil
Additional Details:
| Grade | M320 |
| ISO Grade | 320 |
| Specific Gravity @ 60°F | 0.887 |
| Density, lbs/gal @ 60°F | 7.39 |
| Color, ASTM D1500 | 4.5 |
| Flash Point (COC), °C (°F) | 285 (545) |
| Pour Point, °C (°F) | -14 (7) |
| Viscosity | |
| cSt @ 40°C | 320 |
| cSt @ 100°C | 24.7 |
| SUS @ 100°F | 1701 |
| SUS @ 210°F | 122 |
| Viscosity Index | 99 |
| Acid Number, ASTM D974, mg KOH/g | 0.05 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | <20 |
| Demulsibility, ASTM D2711 | |
| Free Water @ 52°C, mL | >30 |
| Demulsibility, UEC Dynamic Endurance Test | |
| Water in Oil after Centrifuging, vol % | <10 |
| Oil in Water after Centrifuging, vol % | <1 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Oxidation Stability, RPVOT | |
| ASTM D2272, minutes | 340 |
| Rust Test, ASTM D665 A | Pass |
Licenses & Approvals:
Bearing Oil M meets the requirements of the following industry and OEM specifications:- Morgan Construction Advanced Lubricant Specification, Revision 2.5 (05/2009)
- SMS Siemag SN 180 Part 4 (07/2009)
- U.S. Steel 135, Mill Circulating Oil
Additional Details:
| Grade | M460 |
| ISO Grade | 460 |
| Specific Gravity @ 60°F | 0.891 |
| Density, lbs/gal @ 60°F | 7.42 |
| Color, ASTM D1500 | 4.5 |
| Flash Point (COC), °C (°F) | 293 (559) |
| Pour Point, °C (°F) | -6 (21) |
| Viscosity | |
| cSt @ 40°C | 460 |
| cSt @ 100°C | 31.5 |
| SUS @ 100°F | 2460 |
| SUS @ 210°F | 154 |
| Viscosity Index | 99 |
| Acid Number, ASTM D974, mg KOH/g | 0.05 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | <40 |
| Demulsibility, ASTM D2711 | |
| Free Water @ 52°C, mL | >26 |
| Demulsibility, UEC Dynamic Endurance Test | |
| Water in Oil after Centrifuging, vol % | <10 |
| Oil in Water after Centrifuging, vol % | <1 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Oxidation Stability, RPVOT | |
| ASTM D2272, minutes | 335 |
| Rust Test, ASTM D665 A | Pass |
Licenses & Approvals:
Bearing Oil M meets the requirements of the following industry and OEM specifications:- Morgan Construction Advanced Lubricant Specification, Revision 2.5 (05/2009)
- SMS Siemag SN 180 Part 4 (07/2009)
- U.S. Steel 135, Mill Circulating Oil
Additional Details:
| Grade | M680 |
| ISO Grade | 680 |
| Specific Gravity @ 60°F | 0.907 |
| Density, lbs/gal @ 60°F | 7.55 |
| Color, ASTM D1500 | 8 |
| Flash Point (COC), °C (°F) | 279 (534) |
| Pour Point, °C (°F) | -12 (10) |
| Viscosity | |
| cSt @ 40°C | 656 |
| cSt @ 100°C | 35.8 |
| SUS @ 100°F | 3557 |
| SUS @ 210°F | 175 |
| Viscosity Index | 88 |
| Acid Number, ASTM D974, mg KOH/g | 0.29 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | <60 |
| Demulsibility, ASTM D2711 | |
| Free Water @ 52°C, mL | >26 |
| Demulsibility, UEC Dynamic Endurance Test | |
| Water in Oil after Centrifuging, vol % | <15 |
| Oil in Water after Centrifuging, vol % | <1 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Oxidation Stability, RPVOT | |
| ASTM D2272, minutes | 245 |
| Rust Test, ASTM D665 A | Pass |