Dynalife®150 (new)

Multipurpose Extreme Pressure Lithium Grease

Phillips 66®Dynalife 150 is a multipurpose, extreme pressure (EP) lithium grease developed for use in a wide variety of industrial and automotive applications. It is a versatile, general purpose grease recommended for use in applications where operating temperatures and loads are moderate. It is available in multiple grades to cover a wide range of applications.

Dynalife 150 is manufactured with high-quality base oils, a special polymer, and lithium-12-hydroxystearate soap thickener. It is fortified with EP and antiwear additives plus rust and oxidation inhibitors. It has good load carrying capacity for protection against wear, good oxidation resistance for long service life, protects metal parts against rust and corrosion, and is resistant to water washout. It has good resistance to shearing and will not soften excessively during high-speed operation in rolling element bearings. It forms a good seal to help minimize bearing contamination.

Features & Benefits

  • Multipurpose grease for use in a wide variety of applications
  • Good EP and antiwear properties
  • Good shear stability
  • Good oxidation resistance and thermal stability
  • Protects against rust and corrosion
  • Resists water washout
  • Good low-temperature pumpability
  • Suitable for use in centralized lube systems (NLGI Grade No. 1 & 2)


  • Plain and rolling element bearings in compressors, fans, centrifugal pumps and other industrial equipment where operating temperatures and loads are moderate
  • Chassis parts, universal joints and water pumps on passenger cars, light trucks and other mobile equipment
  • Wheel bearings of passenger cars equipped with drum brakes
  • Centralized grease lubrication systems (NLGI Grade No. 1 & 2)
  • General purpose shop/industrial grease

Technical Details

Licenses & Approvals


Additional Details
NLGI Grade1
Thickener TypeLithium
Dropping Point, °C (°F), ASTM D2265180 (356)
Density, lbs/gal7.50
Viscosity, Kinematic, ASTM D445
cSt @ 40°C150
cSt @ 100°C11.3
Penetration, Worked (60 strokes), ASTM D217310-340
Oxidation Stability, 100 Hours, psi (kPa), ASTM D9428.4 (58)
Four-Ball Wear Scar, mm, ASTM D22660.50
Four-Ball EP, Weld Load, Kgf, ASTM D2596250
Timken OK Load, lbs, ASTM D250940
Corrosion Prevention, ASTM D1743Pass
Copper Corrosion, ASTM D40481b