Omniguard®460 (new)

Premium Water Resistant Multipurpose Extreme Pressure Calcium Sulfonate Grease

Phillips 66®Omniguard 460 is a premium quality, multipurpose, extreme pressure (EP), calcium sulfonate grease specially developed for use in industrial and automotive equipment operating under severe conditions involving high loads, high temperatures and/or wet environments.

Omniguard 460 is manufactured with high-quality base oils, a special polymer, and a non-soap, calcium sulfonate thickener. It is fortified with EP and antiwear additives and rust and corrosion inhibitors. It protects against rust and corrosion in high humidity, high-temperature applications such as those found in the steel, lumber, tire manufacturing, and paper industries. It has outstanding shear stability, resistance to water washout and load carrying capacity to protect against wear and resist mechanical breakdown.

Features & Benefits

  • Excellent oxidation resistance and thermal stability at high temperatures
  • Outstanding rust and corrosion protection, including resistance to saltwater corrosion
  • Excellent EP and antiwear properties
  • Outstanding resistance to water washout
  • Outstanding shear stability
  • Good adhesion to metal surfaces
  • High dropping point (500°F)
  • Does not contain heavy metals or other environmentally undesirable components

Applications

  • Industrial equipment operating under unfavorable conditions involving water contamination, high loads and/or high temperatures
  • Plain and rolling element bearings operating in corrosive environmental conditions
  • Rolling mills, hot roll tables, continuous casters, ingot buggies and slab mills
  • Steel mill roller bearings, conveyors and gears
  • Marine and heavy mobile equipment exposed to salt water
  • Paper machine wet- and dry-end bearings and hot calender stacks
  • Automotive wheel bearings and chassis parts

Technical Details

Licenses & Approvals

N/A

Additional Details
NLGI Grade1
Thickener TypeCalcium Sulfonate
ColorTan
TextureSmooth
Density, lbs/gal8.15
Dropping Point, °C (°F), ASTM D2265260 (500)
Viscosity, Kinematic, ASTM D445
cSt @ 40°C460
cSt @ 100°C30
Penetration, Worked (60 strokes), ASTM D217310-340
Oxidation Stability, 100 Hours, psi (kPa), ASTM D942<1 (<6.9)
Four-Ball Wear Scar, mm, ASTM D22660.44
Four-Ball EP, Weld Load, Kgf, ASTM D2596500
Timken OK Load, lbs, ASTM D250960
Corrosion Prevention, ASTM D1743Pass
Copper Corrosion, ASTM D40481b