OPEN GEAR LUBE
CHLORINE-FREE, SOLVENT-CUTBACK OPEN GEAR LUBRICANT
Phillips 66® Open Gear Lube is an adhesive, residual compounded, extreme pressure (EP) gear lubricant with a low viscosity sacrificial diluent for ease of application. It is recommended primarily for the lubrication and cushioning of open and semi-enclosed gears on mining shovels, draglines and excavation equipment used in underground or surface mines and in rock quarries. It also may be used for the lubrication of some cable-actuated equipment.
Links of Interest
Features & Benefits
- Excellent adhesion to metal surfaces
- Forms a heavy, tenacious film to lubricate and cushion gear teeth
- Good extreme-pressure properties for protection under heavy or shock loads
- Good resistance to water washout
- Protects against rust and corrosion
- Will not flake off at low temperatures
- Does not contain any chlorine, lead or carcinogens
- Easy application, by spraying, brushing or dripping
- Suitable for use with automatic lubrication equipment
Applications
- Open and semi-enclosed gears found on mining shovels, draglines and excavation equipment
- Guides and sliding surfaces with large clearances, where asphaltic-type lubricants are specified
- Cables on draglines, clamshells, hoists and other cable-operated equipment where cable clamp safety devices are not used
Technical Details
Licenses & Approvals:
Open Gear Lube meets the requirements of the following industry specification:- ANSI/AGMA Standard 9005-E02
Additional Details:
| Grade | 585 W |
| Specific Gravity @ 60°F | 0.98 |
| Density, lbs/gal @ 60°F | 8.16 |
| Color, Visual | Black |
| Appearance | Viscous |
| Consistency | Semi-fluid |
| Flash Point (COC), with solvent, °C (°F) | 150 (302) |
| Solvent Content, wt % | 26 |
| Viscosity, without solvent: | |
| cSt @ 100°C | 540 |
| SUS @ 210°F | 2600 |
| Copper Corrosion, ASTM D130 | 4a |
| Four-Ball EP, ASTM D2596: | |
| Weld Load, kgf | 400 |
| Load-Wear Index, kgf | 53 |
| Four-Ball Wear, ASTM D2266, Scar Diameter, mm | 0.4 |
| Rust Test, ASTM D1743 | Pass |
| Timken OK Load, ASTM D2782, lb | 45 |
| Usable Temperature Range: | |
| °C | -40 to 0 |
| °F | -40 to 32 |
Licenses & Approvals:
Open Gear Lube meets the requirements of the following industry specification:- ANSI/AGMA Standard 9005-E02
Additional Details:
| Grade | 585 NC |
| Specific Gravity @ 60°F | 0.978 |
| Density, lbs/gal @ 60°F | 8.14 |
| Color, Visual | Black |
| Appearance | Viscous |
| Consistency | Semi-fluid |
| Flash Point (COC), with solvent, °C (°F) | >93 (>199) |
| Solvent Content, wt % | 12 |
| Viscosity, without solvent: | |
| cSt @ 100°C | 540 |
| SUS @ 210°F | 2600 |
| Copper Corrosion, ASTM D130 | 4a |
| Four-Ball EP, ASTM D2596: | |
| Weld Load, kgf | 400 |
| Load-Wear Index, kgf | 65 |
| Four-Ball Wear, ASTM D2266, Scar Diameter, mm | 0.5 |
| Rust Test, ASTM D1743 | Pass |
| Timken OK Load, ASTM D2782, lb | 45 |
| Usable Temperature Range: | |
| °C | -18 to 10 |
| °F | 0 to 50 |
Licenses & Approvals:
Open Gear Lube meets the requirements of the following industry specification:- ANSI/AGMA Standard 9005-E02
Additional Details:
| Grade | 595 NC |
| Specific Gravity @ 60°F | 1 |
| Density, lbs/gal @ 60°F | 8.33 |
| Color, Visual | Black |
| Appearance | Viscous |
| Consistency | Semi-fluid |
| Flash Point (COC), with solvent, °C (°F) | >93 (>199) |
| Solvent Content, wt % | 8 |
| Viscosity, without solvent: | |
| cSt @ 100°C | 540 |
| SUS @ 210°F | 2600 |
| Copper Corrosion, ASTM D130 | 4a |
| Four-Ball EP, ASTM D2596: | |
| Weld Load, kgf | 400 |
| Load-Wear Index, kgf | 65 |
| Four-Ball Wear, ASTM D2266, Scar Diameter, mm | 0.5 |
| Rust Test, ASTM D1743 | Pass |
| Timken OK Load, ASTM D2782, lb | 45 |
| Usable Temperature Range: | |
| °C | 0 to 49 |
| °F | 32 to 120 |